Maksa kullerile lisatasuta

Vajate abi? Küsige AI-lt

Hofi Hybrid Pro+ POCO M3

Name: Hofi Hybrid Pro+ POCO M3
Brand: HOFI
SKU: 4180759
Price: 8.96 EUR
Availability: InStock

Hofi Hybrid Pro+ POCO M3

8,96 €

PDF

Kogus

Lisa ostukorvi

Lisa soovinimekirja Võrdle toodet

PDF

Laos 1 Kood 4180759 Mudel HOFI061 Garantii 2 aastat

OsakondTelefonid ja nutitelefonid

KategooriaTelefoni ekraani- ja tagakaitsmed TootjaHOFI

Tarne ja tagastus

Eeldatav tarne reedel, 13. november

Hoiame teid kursis üksikasjaliku jälgimissüsteemi kaudu

Makseviisid

PangakaartVisaMastercardPayPalApple PayGoogle PayPangaülekanne

Esitage küsimus – AI-assistent vastab kohe.

html .tab-container.product_extra.product_tabs.product_tabs-default:not(.dn-product-info-ready)>*{opacity:1!important;visibility:visible!important;pointer-events:auto!important}html .tab-container.product_extra.product_tabs.product_tabs-default:not(.dn-product-info-ready)::before,html .tab-container.product_extra.product_tabs.product_tabs-default:not(.dn-product-info-ready)::after{display:none!important}html .tab-container.product_extra.product_tabs.product_tabs-default:not(.dn-product-info-ready){min-height:0!important}

Kirjeldus

Hofi Hybrid is a high-quality hybrid glass that combines the durability of tempered glass and the flexibility of a protective film.

The design of the accessory based on ceramic coatings provides a hardness level of 7H.

The oleophobic top layer eliminates fingerprints, while the crystal clarity and minimal thickness of 0.2mm ensure full image saturation and high touch sensitivity.

The hybrid glass perfectly protects the device's display from scratches and during unexpected falls.

The hybrid glass Hofi Hybrid is a safe-to-use accessory that does not shatter upon impact.

The glass/film is cut only for the flat part of the display with a raised structure, in accordance with and based on the die prepared by the manufacturer of the specific phone model. Only such cutting of the film/glass will ensure complete compatibility with our protective accessories.

Due to the various edge milling of displays, a delicate air halo may form around the screen after the installation of the protective film/glass on the screen. This is a natural situation and depends on the screen itself.

INSTALLATION INSTRUCTIONS

1) Start the installation in the bathroom right after a shower - the steam will absorb all the dust from the air, and it will not interfere with the installation.

2) Clean and degrease the screen surface thoroughly, then polish it to a shine with a dry cloth.

3) Install the coating as evenly as possible - you can position it using two pieces of tape, sticking them to the side of the device.

4) Remove air bubbles by firmly pressing the entire surface in circular motions for several seconds. Do this so that the adhesive layer bonds with the screen as strongly as possible.